iTaste VV Kit


1. Learn more about each component below.

2. Build your own starter kit by adding exactly what you want.


Out of stock


Out of stock


Out of stock


Only 1 left in stock


Out of stock


Only 1 left in stock


Out of stock


In stock

Category: .
Look at these!
This is not a product photo, it is an actual shot of Rebekah's vape. All of what you see is available here at Vaping Fuel.

This is not a product photo, it is an actual shot of Rebekah’s vape. All of what you see is available here at Vaping Fuel.

The iTaste VV Kit is the perfect vape for anyone just starting out, as well as seasoned professional vapers.

I usually recommend it to beginners but it’s not exactly the EASIEST unit to use, it’s only the BEST unit to use.

One problem with starting a new habit/hobby/pastime/whatever, is usually we like to start out cheap and end up regretting it later. If you get this kit, you will not have that happen to you.

It offers simple enough use as well as powerful enough features to make it the perfect fit for anyone.

Ease of Use
Battery Life

What do these mean?

Ease of Use

How easy is it for the average person to use it on a daily basis. This includes what you may have to do to keep it charged etc.

Battery Life

How long does the battery last compared to other options.


How compatible is it with atomizers on the market. How much flexibility do I have with customization and setup of this device.


How easy is it to travel with. This also includes how much you may have to bring along with you somewhere to keep it charged. Also, how heavy it might be.


How much will it cost me initially as well as possible maintenance costs such as replacement parts or batteries.

iTaste VV

The iTaste VV V3.0 is a microprocessor controlled variable-voltage/variable-wattage (VV/VW) personal vaporizer that lets you adjust the voltage or wattage in seconds with just a few button presses.

Variable Voltage:
Voltage can be adjusted from 3.3 – 5.0 volts in .1 volt increments.

Variable Wattage:
Wattage can be adjusted from 6.0 – 11.0 W in .5 watts increments.

Ohms meter:
Resistive Load Detection.

Puff Counter:
The puff counter will record how many puffs you have taken. The records will be cleared when the device is turned off.

Short Circuit/Atomizer Protection:
Short Circuit/Atomizer Protection helps protect the iTaste VV against faulty atomizers.

Over-Discharge Protection:
The iTaste VV monitors the battery voltage and will automatically turn off when the battery is discharged.

LED Battery Indicator:
The iTaste VV battery utilizes an advanced capacity display via green, yellow and red LED lights. Users will know the battery’s capacity via the color of the LED Button.
The LED lights will show green, yellow or red to indicate full battery life, half capacity or charging needed.

Superior Battery Life:
The iTaste VV e-cigarette features a built-in 800 mAh polymer Li-Ion rechargeable battery.

510 Threaded:
The iTaste VV is threaded to accept 510 accessories.

eGo Threaded:
The iTaste VV is threaded to accept eGo accessories.

ON/OFF Battery Switch:
Quickly clicking three times will power the device on or off. Once the device is on, holding down the button will activate the battery. This safety feature prevents the atomizer from turning on while it’s in your pocket or bag, as well as inadvertent settings changes.

10-Second Cutoff:
If the button is held down for 10 seconds or longer, the iTaste VV will shut itself off until the button is released.

The iTaste VV is charged through a Micro USB Port. You can recharge it with any standard MicroUSB cable. It can also work as a pass-through device for simultaneous vaping and charging.

Settings Retention:
The device remembers the last voltage or wattage used when switching batteries.

Display Information:
The bright display shows resistance (ohms), voltage, wattage, atomizer voltage output, puff count, and last-used settings.


  • 1 x iTasteVV (V3.0) 800mAh Polymer Li-ion Intelligent Rechargeable Battery
  • 1 x iTaste USB Retractable Cable
  • 1 x instruction manual


Finally, a tank we can rant and rave about!

The Aerotank Mini…

  • is the perfect-looking addition to your iTaste VV
  • has a bottom dual-coil atomizer
  • comes with a Pyrex glass tank
  • has an adjustable airflow
  • comes with it’s own stainless steel drip tip (we do think that the upgraded drip tip looks even sweeter)
  • is built so that each and every part can unscrew for cleaning or replacement
  • holds 1.5 mL of Vaping Fuel E-Liquid
  • measures2-1/8″L x 9/16″D (without drip tip)


  • 1 x Aerotank Mini with Airflow Control (Pyrex tank, top cap, bottom cap and 510 base)
  • 1 x 510 Drip tip
  • 1 x Dual Coil Atomizer Head


As a cheaper alternative to the Aerotank Mini, the eVod is a fantastic system that will work equally well for new and experienced vapers. These are the perfect size for anyone using the eGo, (since they are the same size) but also work great on a big-battery MOD.

To fill it, just unscrew the bottom and go. No need for a syringe or other such nonsense.


  • 1 x 1.7ml tank assembly with attached mouthpiece
  • 1 x atomizer head @ 2.4ohm


To the Aerotank Mini. It’s pretty much better in every way possible.


Don’t Forget:

Get your extra atomizer heads

Carrying Case

Nice Construction. Very durable zippered carrying case. Plenty of room for batteries, e-liquid, atomizers, and tanks.

Measures 7″ x 4″ x 1.5″

Variable Voltage vs Variable Wattage

Basically, both modes change temperature at which your atomizer “cooks” the liquid. The hotter it is, the stronger the flavor, too hot, and it starts to get burnt.

To understand this fully, you must first understand that atomizers have a certain resistance number. Without explaining boringly, I’ll just say that the lower the resistance (ohms), the hotter it will vape. What this means is that if you have a higher resistance atomizer (3.0 Ω for example) then you would have to bump up your voltage to compensate for it to get the flavor to where you want it to be.

With variable wattage (also called variable power), the unit does the math for you and all you have to do is set your wattage level exactly where you want it to be no matter which resistance atomizer you are using.

This means that once you set your wattage to where you like it, you can use ANY atomizer of any resistance and it will always vape at the same temperature.